Foot/Kayak/Canoe Water Pump System

The Foot Pump system is the choice of champions worlwide. Designed to be effective and of minimalistic design to avoid issues. This pump system is suitable for use in kayaks and canoes.

Standard Foot Pump – 2 x 120mm inflation pumps

The Foot Pump system consists of two inflations (one under each foot), two inlet and two outlet valves, one pickup tube, two T-connectors and outlet plug.

This Ultra Light Pump System, works simply with your usual paddle motion and leg drive and foot pressure.

The non-return valves are nylon injected, with a neoprene ball attached to a high quality stainless steel spring. The valves do not block as they are self cleaning in use.

The pump is capable of pumping 4.5 litres of water per minute.

Installation instruction sheet in product images or can be downloaded here.

Additional instructions for kayak fitting:

Tools required:

Knife for cutting clear tubing

12mm drill bit for outlets

29mm Hole Saw for rubber pumps

Fine grit sandpaper

Hold rubbers in preferred position on push plate and neatly outline hole positions for drilling

Drill 4 x holes with 29mm Hole Saw

Gently sand holes to remove sharp edges

Insert rubbers and fit valves to your liking

See diagram for recommended layout

Drill 1 or 2 12mm holes for outlets

Connect all pipes and valves securely

Fill boat with 5 litres of water to prime pumps and test suction